Table of Contents
Advertisement
10 FAQ - EDUnet ULTRA HD
▪ How do I know if all work-stations were recognised by the room keyboard and if
the system is ready for use?
▶ Switch the EDUnet ULTRA HD into sleep mode and then switch it on again.
ð
- The room keyboard queries all stations and displays them.
ð
- Participant stations flash slowly, teacher station and beamer station (optional)
flash rapidly.
Note
If the teacher station is not recognised, no further functions can be executed. The
teacher key needs to be re-assigned.
See also:
2 5.3 Assign the teacher key, Page 23
▪ How do I know if the work-stations are combined into various groups?
▶ Press the group key until an acoustical signal is issued.
▶ Press the "Scan" key.
ð
All participants who are combined into this group are shown.
ð
In the default state, all participants are assigned to group A.
See also:
2 5.4 Assign the group keys, Page 24
▪ Can I use a beamer with an analogue input port (VGA, RGB) with the EDUnet UL-
TRA HD?
▶ Connect a DVI-VGA converter to the beamer to convert digital signals into ana-
logue signals.
▶ Provide an additional mains outlet to supply electrical power to the DVI-VGA con-
verter.
▪ Can I use a notebook with an analogue VGA output port with the EDUnet ULTRA
HD?
▶ Connect a VGA-DVI converter to the notebook to convert analogue signals into di-
gital signals.
▶ Provide an additional mains outlet to supply electrical power to the VGA-DVI con-
verter.
▪ Can I use keyboards with built-in USB hub with the EDUnet ULTRA HD?
• Generally, yes. However, the EDUnet ULTRA HD not been tested extensively with
devices of this type.
▶ If the keyboards do not work properly, send one keyboard to the manufacturer.
Instructions for use KaVo EDUnet ULTRA HD
49 / 52
10 FAQ - EDUnet ULTRA HD
Advertisement
Table of Contents
