Send Screen Content "To All - KaVo EDUnet ULTRA HD Instructions For Use Manual

Instructions for use KaVo EDUnet ULTRA HD
7 Using the room keyboard | 7.3 Send screen content "To all"
All operating functions are explained starting from the default status.

7.3 Send screen content "To all"

▶ Press participant key to select one participant to be the sender.
or
▶ Press the "Clear" key, to select the teacher to be the sender.
▶ If applicable, activate or deactivate desired group.
▶ Press the "To all" key.
ð
– All participants see the content of the teacher's screen.
ð
- The control lights of the active groups, selected sender (teacher), and of the "To
all" key are on.
ð
– While the screen content is being sent to all participants, all other functions of
the EDUnet keyboard are blocked.
▶ To stop the procedure, press the "To all" key again.
ð
–The participants see their own screen again.
ð
- The sender selection is maintained.
Note
When the function "To all" is activated, the mice and keyboards of all the parti-
cipants' (recipient) computers are blocked except for those of the teacher's (sender)
computer.
The block is cleared by turning off the "To all" function, or by pressing the "Clear"
key.
30 / 52