Table of Contents
Advertisement
Instructions for use KaVo EDUnet ULTRA HD
4 Assembly | 4.2 Connect the bus cable
▶ Start with any participant box and connect the bus cable to the "BUS out" con-
nector and to the "BUS in" connector of the next participant box. Please note that
the "BUS in" connector can be recognised by its control light (LED).
▶ Connect all participant boxes to each other as described (see ring system).
▶ Connect the unoccupied "BUS in" connector of the first participant box to the last
unoccupied "BUS out" connector to form the ring.
▶ Outline the wiring in the enclosed installation plan.
18 / 52
Advertisement
Table of Contents
