Advertisement
FIGURE 7
25
3/8 X 50mm 17
28
STEP 7:
• Route the BI/TRI CABLE (29) through the PULLEY BOOM (3) and SECURELY assemble two 4-1/2" PULLEYS (7) to the BOOM (3)
using four RH CAPS (28), two 3/8 X 50mm BOLTS (17), four 3/8" SAE WASHERS (25), four 3/8" RH WASHERS (26), and two 3/8"
LOW HEIGHT LOCK NUTS (24) as shown in FIGURE 7.
FIGURE 8
STEP 8:
• Route the BI/TRI CABLE (29) inside the REAR UPRIGHT (4) and SECURELY assemble one 4-1/2" PULLEY (7) to the REAR UP-
RIGHT (4) using two RH CAPS (28), one 3/8 X 102mm BOLT (37), two 3/8" SAE WASHERS (25), two 3/8" RH WASHERS (26), two
3/8 X 1-1/4" FLANGE SPACERS (14) and one 3/8" LOW HEIGHT LOCK NUT (24) as shown in FIGURE 8.
26
7
24
4
29
24
3
29
7
14
26
11
25
37 3/8 X 102mm
28
Advertisement
