Advertisement
LUBRICATION NOTE:
When finished assembling the Weight Stack, open the lube Pack provided
with this unit and apply a thin film of Lubricant around the first 2 to 3
inches of each Guide Rod above the Head Plate Assembly. After the
cables are installed, use of the machine will spread the lubricant over the
length of the Guide Rods and into the Head Plate
bushings
TIGHTEN!
FIGURE 6
STEP 6:
• Securely tighten all loose frame connections made to this point, then proceed to snap RH CAPS
(27)(28) over the RH WASHERS (26) on all tightened connections.
10
Advertisement
