Advertisement
1
24
FIGURE 1
STEP 1:
• SECURELY assemble the FOOT PLATE (5) to the BASE FRAME (2) using two RH CAPS (28), one 3/8 X 97mm BOLT (21), two 3/8"
SAE WASHERS (25), two 3/8" RH WASHERS (26) and one 3/8" LOW HEIGHT LOCK NUT (24) as shown in FIGURE 1.
• SECURELY assemble the TOWER (1) to the BASE FRAME (2) using four RH CAPS (28), two 3/8 X 97mm BOLTS (21), four 3/8"
SAE WASHERS (25), four 3/8" RH WASHERS (26) and two 3/8" LOW HEIGHT LOCK NUTS (24) as shown in FIGURE 1.
26
25
28
3/8 X 97mm 21
3/8 X 97mm 21
2
5
5
Advertisement
