Download
Share
Print this page
LifeFitness CLUB Series Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. LifeFitness Manuals
  4. Fitness Equipment
  5. Club Series
  6. Assembly instructions manual
LifeFitness CLUB Series Assembly Instructions Manual

LifeFitness CLUB Series Assembly Instructions Manual

Leg press
Hide thumbs Also See for CLUB Series:

Advertisement

Quick Links

Download this manual
CLUB SERIES LEG PRESS
ASSEMBLY INSTRUCTIONS
Part # 7137701
1
Revision:08/7/01
Rev A.

Advertisement

loading

Related Manuals for LifeFitness CLUB Series

Summary of Contents for LifeFitness CLUB Series

  • Page 1 CLUB SERIES LEG PRESS ASSEMBLY INSTRUCTIONS Part # 7137701 Revision:08/7/01 Rev A.
  • Page 2 PARTS LIST PART # DESCRIPTION PART # DESCRIPTION 69361xx TOWER 3102903 3/8 X 2-1/2” BOLT 6937301 CABLE 3102922 3/8 X 2-3/4” BOLT 6793001 PRODUCT WARNING LABEL 3102904 3/8 X 3” BOLT 3102933 3/8-16 X 2 BOLT 3102905 3/8 X 3-3/4” BOLT 6692601 3 X 2 END CAP 3202404...
  • Page 3 7" 1/2"...
  • Page 4 17 3/8 X 3-3/4” FIGURE 1 STEP 1: • LOOSELY assemble the FRONT CROSS SUPPORT (5) to the TOWER (1) and the PIVOT ARM SUPPORT (2) using eight RH CAPS (28), four 3/8 X 3-3/4” BOLTS (17), eight 3/8” SAE WASHERS (21), eight 3/8” RH WASHERS (22) and four 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 1.
  • Page 5 15 3/8 X 2-3/4” 3/8 X 2-3/4” 15 FIGURE 2 STEP 2: • LOOSELY assemble the TOP CROSS SUPPORT (4) to the TOWER (1) and the PIVOT ARM SUPPORT (2) using eight RH CAPS (28), four 3/8 X 2-3/4” BOLTS (15), eight 3/8” SAE WASHERS (21), eight 3/8” RH WASHERS (22) and four 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 2.
  • Page 6 15 3/8 X 2-3/4” 17 3/8 X 3-3/4” FIGURE 3 STEP 3: • LOOSELY assemble the SEAT FRAME (9) to the FRONT CROSS SUPPORT (5) using four RH CAPS (28), two 3/8 X 3-3/4” BOLTS (17), four 3/8” SAE WASHERS (21), four 3/8” RH WASHERS (22) and two 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 3.
  • Page 7 17 3/8 X 3-3/4” FIGURE 4 STEP 4: • LOOSELY assemble the REAR CROSS SUPPORT (6) to the TOWER (1) and the SEAT FRAME (9) using eight RH CAPS (28), four 3/8 X 3-3/4” BOLTS (17), eight 3/8” SAE WASHERS (21), eight 3/8” RH WASHERS (22) and four 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 4.
  • Page 8 3/8 X 3” BUTTON HEAD FIGURE 5 STEP 5: • Slide one 2” ACCORDIAN SLEEVE (23), one 5-1/2” ACCORDIAN SLEEVE (24) and two PILLOW BLOCKS (25) over the shafts on the PIVOT ARM (7) as shown in FIGURE 5. • Assemble four 3/8 X 3” BUTTON HEAD CAP SCREWS (18) and four STARLOCK WASHERS (40) to the the PILLOW BLOCKS (25) as shown in FIGURE 5.
  • Page 9 TIGHTEN SCREWS (BOTH SIDES) 18 3/8 X 3” BUTTON HEAD FIGURE 6 STEP 6: • SECURELY assemble the PILLOW BLOCKS (25) on the PIVOT ARM (7) to the TOWER (1) and the PIVOT ARM SUPPORT (2) using four previosly inserted 3/8 X 3” BUTTON HEAD CAP SCREWS (18), four 3/8” SAE WASHERS (21), four RH WASHERS (22), four 3/8”...
  • Page 10 15 3/8 X 2-3/4” FIGURE 7 STEP 7: • SECURELY assemble the HANDLE (3) to the SEAT FRAME (9) using two 3/8 X 2-3/4” BOLTS (15), four 3/8” SAE WASHERS (21), four RH WASHERS (22), two 3/8” LOW HEIGHT LOCK NUTS (19) and four RH CAPS (28) as shown in FIGURE 7...
  • Page 11 FIGURE 8 3/8 X 2-3/4” 15 STEP 8: • SECURELY assemble the SEAT PAD (39) to the SEAT FRAME (9) using two RH CAPS (28), two 3/8 X 2-3/4” BOLTS (15) and two 3/8” RH WASHERS (22) as shown in FIGURE 8. 15 3/8 X 2-3/4”...
  • Page 12 FIGURE 10 HEAVY WEIGHT OPTION STEP 10: • Insert the two GUIDE RODS (11) (found in SHROUD KIT box) into the base of the TOWER (1) as shown in FIGURE 10. Lubricate the GUIDE RODS (11) with a slicon or teflon spray that is available at most hardware stores. •...
  • Page 13 FIGURE 11 14 3/8 X 2-1/2” TIGHTEN! STEP 11: • SECURELY assemble the GUIDE ROD SUPPORT (8) to the TOWER (1) using four RH CAPS (28), two 3/8 X 2-1/2” BOLTS (14), four 3/8” RH WASHERS (22) and two 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 11. (NOTE: Be sure to route cable through the hole of the GUIDE ROD SUPPORT (8) before tightening.) •...
  • Page 14 FIGURE 12 STEP 12: • The WEIGHT STACK LABEL sheet (41) includes labels for both lbs. and kgs. for both the standard and optional weight stacks. • Peel the backing off the WEIGHT STACK LABELS (41), line up sheet to the right of the selector opening and apply labels to the WEIGHT PLATES (36 or 37), starting with the HEAD PLATE (12) as shown in FIGURE 12.
  • Page 15 13 3/8 X 1-3/4” FIGURE 13 STEP 13: • Carefully route the CABLE around the pulleys as shown. Make sure the CABLE is in the grooves of all the pulleys. • SECURELY assemble the 4-1/2” PULLEY (31) to the horizontal pulley bracket on the SEAT FRAME (9) using one RH CAP (28), one 3/8 X 1-3/4”...
  • Page 16 FIGURE 15 STEP 15: • Assemble the PLACARD LABEL (34) or the LANGUAGE ADDENDUM PLACARD LABEL (35) to the FRONT SHROUD as shown in FIGURE 15.
  • Page 17 • Upholstery with mild soap and water. • Guide rods with a cotton cloth. • Hand grips with mild soap and water. • Frame damage can be repaired with touch-up paint purchased from your LifeFitness customer service representative at (800)351- 3737 Inspect: •...