Advertisement
25
3/8 X 43mm 16
28
FIGURE 3
STEP 3:
• Route the BI/TRI CABLE (29) around one 4-1/2" PULLEY (7) and SECURELY assemble the 4-1/2" PULLEY (7) to the BRACKET on the
HEAD PLATE (12) using four RH CAPS (28), two 3/8 X 43mm BOLTS (16), four 3/8" SAE WASHERS (25), four 3/8" RH WASHERS (26)
and two 3/8" LOW HEIGHT LOCK NUTS (24) as shown in FIGURE 2. (NOTE: Make sure CABLE runs over the retaining bolt.)
7
26
24
12
7
29
ADJUSTMENT
Advertisement
