Panasonic KX-TD816JT Features Manual page 206

3.1 System Expansion
Conditions
• It is possible to programme the E&M signal, voice path type and voice level (transmit /
receive) of the E&M Line Unit. <[442] Voice Path Type, [443] Voice Level (Transmit),
[444] Voice Level (Receive)> For details about the E&M signal, voice path type and voice
level, refer to Installation Manual.
• The FLASH button does not function as the disconnection key.
• The ability to perform Call Forwarding/Call Transfer to TIE line is determined on a Class
of Service basis. <[503] Call Transfer to Outside Line, [504] Call Forwarding to Outside
Line>
• When a TIE call arrives at a busy extension which has disabled Call Waiting, a busy tone
will be sent to the caller. If required, Intercept Routing – No Answer (IRNA) can be
activated. <[990] System Additional Information, Area 07-Bit 7>
Programming Guide References
• [100] Flexible Numbering
• [109] Expansion Unit Type
• [128] PBX Code
• [129] E&M Signal Assignment
• [220] TIE First / Inter Digit Time
• [340] TIE Line Routing Table
• [341] TIE Modify Removed Digit / Added Dial
• [431] TIE Table Number Assignment
• [432] TIE Incoming Assignment
• [433] TIE Outgoing Assignment
• [434] TIE Subscriber Number Removed Digit
• [435] TIE Added Number
• [436] TIE Wink Time Out Assignment
• [437] Outside-to-TIE Transfer
• [438] TIE-to-Outside Transfer
• [439] TIE-to-TIE Transfer
• [440] TIE Security Type
• [441] Line Hunting Sequence
• [442] Voice Path Type
• [443] Voice Level (Transmit)
• [444] Voice Level (Receive)
• [445] TIE Receive Dial
• [503] Call Transfer to Outside Line
• [504] Call Forwarding to Outside Line
• [811] DISA / TIE User Codes
• [990] System Additional Information
Features Guide References
None
206 Features Guide