1.15 Audible Tone Features
Ringing, Discriminating
Description
Allows the extension user to identify the incoming call by the ringing pattern. (See Section 5
"Tone / Ring Tone".)
Conditions
• When there are multiple incoming calls and the extension goes from off-hook to on-hook,
the calls are rung according to the following priority:
a)
Consultation Hold Recall
b)
An incoming call from a line in which the Prime Line Preference – Incoming function
has been set (with a proprietary telephone only)
c)
Call Waiting
d)
Incoming calls; Hold Recall; Transfer Recall
• If multiple incoming calls arrive at an on-hook extension simultaneously, priority as to
which calls should be rung is generally on a "first-come, first-served" basis. In the case of
proprietary telephones (PT), however, when the Prime Line Preference – Incoming function
has been set, this line takes precedence.
• Incoming TAFAS (Trunk (Outside Line) Answer From Any Station) calls can be identified
by ringing signals sent out from the external pager. The ringing pattern is the same as the
outside calls.
• The digital PT user can select a desired tone frequency for each CO button.
Programming Guide References
No programming required.
Features Guide References
• Ringing Tone Selection for CO Buttons
User Manual References
None
156
Features Guide