Phantom Extension - Panasonic KX-TD816JT Features Manual

Phantom Extension

Description
Allows the system to route calls to a phantom extension. A call to a phantom extension is sent
to extensions that have the corresponding Phantom Extension button. You can call the phantom
extension by pressing the Phantom Extension button or by dialling the phantom extension
number. If several extensions have the same phantom extension number, they will ring
simultaneously.
Conditions
• Types of calls whose destination can be the phantom extension are:
Outside calls
Intercom calls Extension; Transfer
• A phantom number must be assigned <[130] Phantom Extension Number Set> before
assigning the Phantom Extension button by Station Programming.
• There is a maximum of 128 phantom numbers. Each number has two to four digits,
consisting of numbers 0 through 9.
• The phantom number cannot be used for feature settings such as Call Forwarding.
• The lighting patterns and statuses of the Phantom Extension button are shown below.
Lighting pattern
Off
Red on
Flashing green rapidly
• A DSS (Direct Station Selection) button can be assigned as the Phantom Extension button
so that the operator can use the button for transferring a call.
• Whether or not the extension will ring when a call is received at a phantom extension is
programmable by Station Programming.
Programming Guide References
• [130] Phantom Extension Number Set
Features Guide
Call type
Direct In Lines (DIL) 1:1;
Direct Inward System Access (DISA);
Intercept Routing – No Answer (IRNA);
Uniform Call Distribution (UCD)-Overflow
Phantom Extension Status
Idle
Calling a phantom extension
Incoming call
1.3 System Features
43