1.3 System Features
To meet the user's various needs, DSS buttons can be changed to the other function buttons.
PF (Programmable Feature) buttons printed as F1 through F16:
These buttons are provided with no default setting. The paired telephone user can programme
the buttons for the other function buttons.
ANSWER button:
Used to answer an incoming call to the paired telephone.
RELEASE button:
Used to disconnect the line during or after a conversation or to complete a Call Transfer.
Conditions
• Programming the DSS and PF buttons can be done only from the paired telephone using
Station Programming or Programming with Personal Computer. System Programming with
a Proprietary Telephone is not available.
• If the extension number assigned to a DSS button is changed to another number, the DSS
button automatically follows the new number. (Re-programming is not necessary.)
• During System Connection
• If a port connected to a console is programmed for XDP jack, a single line telephone can be
connected to the port in parallel. <[600] EXtra Device Port>
Installation Manual References
• 2.3.2 Extension Connection
Programming Guide References
• [007] Console Port and Paired Telephone Assignment
• [600] EXtra Device Port
Features Guide References
• Button, Flexible
• EXtra Device Port (XDP)
User Manual References
• 2.2.1 Basic Calling
• 3.2.4 Using the ANSWER / RELEASE Button [KX-T7541 only]
Available for the KX-TD1232 only.
*1
24
, consoles must be paired with telephones in the same system.
*1
Features Guide