Panasonic KX-TD816JT Features Manual page 201

KX-TD816/1232
3.
TIE Line Routing Table
The TIE Line Routing Table is referenced by the system to identify the outside line
route, when an extension user makes a TIE call.
It is necessary to make unified routing tables with each PBX in your TIE line network.
A routing pattern appropriate for each call is decided by the first three digits (except the
TIE line access number) of the dialled number.
There are two system programmes for the tables:
[340] TIE Line Routing Table: used to assign the access number (PBX code or
extension number) and outside line group hunt sequence.
[341] TIE Modify Removed Digit / Added Digit: used to assign removed and added
digits of the dialled digits of the TIE call.
Programming Example
<Example>
Your system is PBX-1 and there are four PBXs in your TIE line network. To identify the
outside line route as illustrated below, you should make the following routing table.
Features Guide
1.
TIE line access number "7", PBX code "952" and outside line access number "0",
and a special dial tone is heard.
2.
The DISA/TIE user code (if required) and desired phone number.
Extension 1011 is connected to the desired outside party through the other PBX
which has PBX code "952".
Notes
The DISA/TIE user code <[811] DISA / TIE User Codes>) is required when the
outside line security mode is selected <[440] TIE Security Type>.
Call Forwarding / Call Transfer to Outside Line
<Example>
TIE Line
DISA
E&M
7-952-1011
PBX Code 951
Ext. 1011
TIE Line Network
Explanation
Extension 1011 dials as follows:
1.
TIE line access number "7", PBX code "952" and extension number "1011".
2.
The call is forwarded or transferred by extension 1011 of the other PBX which
has PBX code "952" to the designated outside line.
Other PBX
Outside Line
E&M
Forwarded / Transferred
PBX Code 952
to Outside Line
Ext. 1011
3.1 System Expansion
CO
Outside party
201