Panasonic KX-TD816JT Features Manual page 182

2.2 ISDN Information for Other Sections
Section
1.3 Night Service
System
Features
Phantom Extension
Station Message
Detail
Recording (SMDR)
1.5 Ring Group
Attended
Features
Uniform Call
Distribution (UCD)
1.6 Automatic Route
Selection (ARS)
Originating
Features
Outside Line
Connection
Assignment –
Outgoing
182
ISDN Information for Section 1, General Features
Title
• The following programming items may be assigned
differently for the day and night modes.
[151-152] DDI Ringing Assignment – Day / Night
[448-449] Extension Ringing Assignment – Day / Night for
ISDN
[452-453] ISDN Ring Service Assignment – Day / Night
[614-615] Outgoing Permitted Outside Line Assignment –
Day / Night for ISDN Extension
• The destination of a Direct Dialling In (DDI) or Multiple
Subscriber Number (MSN) call can be the phantom
extension.
• (5) Dial Number (in the explanation of the printout format)
Received Call: Shows <INCOMING> and <I>. If a call is
carried by an ISDN network, also shows the telephone
number of the calling party.
Example: <I>1234567890
• The destination of a Direct Dialling In (DDI) or Multiple
Subscriber Numbers (MSN) call can be the ring group.
• UCD can be used when the floating number of UCD is
assigned as the Direct Dialling In (DDI) destination.
• ARS with DTMF: When making a call to an ISDN line
using the memory dialling, and the number has a pause in it,
the number after the pause will be sent to the line as DTMF
signals. This function is useful when accessing a special
network service which can be accessed only by the DTMF
signalling. <[990] System Additional Information, Area 06-
Bit 9>
• Programme [614-615] Outgoing Permitted Outside Line
Assignment – Day / Night for ISDN Extension is used to
determine the outside line which can be accessed by an
ISDN extension.
ISDN Information
Features Guide