When You Use A Panasonic Proprietary Telephone - Panasonic KX-TD500AL User Manual

Operation

When You Use a Panasonic Proprietary Telephone

When you use a Panasonic Proprietary Telephone and the DSS Console, they may have some of
the useful function buttons listed below. These buttons make operations simple. The illustrations may
differ from the buttons on your telephone.
Used to answer an incoming call.
ANSWER
Used to receive an incoming intercom
AUTO ANSWER
call in the hands-free mode or mute the
microphone during a conversation.
MUTE
Used for System Speed Dialling or
AUTO DIAL
storing programme changes.
STORE
CO: Used to make or receive an
outside call. A Loop-CO button
supports all lines. Pressing this button
(CO)
seizes an idle line automatically.
(Button assignment is required.)
Also used as the desired function
buttons. (Button assignment is
required.)(Only the CO "number" (e.g.,
1, 2) may be shown on some
telephones.)
Conference: Used to establish a three-
party or five-party conference call.
CONF
DSS: Used to access the extension.
(Only the "S" may be shown on some
(DSS)
telephones.)
Used to send a flash signal to the
FLASH Central Office or another connected
PBX. Or used to disconnect the current
call and make another call without
hanging up.
Function: Located beside the display.
Used to perform the displayed function
or operation.
20
FWD / DND (Call Forwarding / Do Not
Disturb):
FWD/DND Used to perform Call Forwarding or Do
Not Disturb.
Used to place a call on hold.
HOLD
Used to make or receive an intercom
call.
INTERCOM
Jog Dial: Used to adjust the volume
and the display contrast or select
desired items for each function.
Used to leave a message waiting
MESSAGE
indication or call back the party who left
the message waiting indication.
Used for hands-free dialling. You can
monitor the party's voice hands-free.
MONITOR
Used to insert a pause when storing a
telephone number. This button also
PAUSE
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
PDN (Primary Directory Number):
Used to make or receive an intercom /
(PDN)
outside call. This button can also be
used to set / cancel various features
available for the extension.
User Manual