Installing Video Memory On The System Board - HP Brio 8172 Upgrade Manual

Installing Video Memory on the System Board

1 Remove the computer's cover (refer to
2 Remove the airflow guide to improve access to the system board (refer to
3 Align the video memory module directly over the socket, making sure that the tapered end of the module is facing the
top of the computer.
4 Firmly press the memory module completely into the socket.
5 Repeat steps 3 and 4 for the second memory module.
6 Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power supply cords
and any telecommunications cables.
7 Turn on the display, let it warm up, and then turn on the computer. Press the
at the bottom of the screen. This displays a summary screen showing the computer's configuration details. Check that
the new memory is recognized (in the Video RAM field).
"Removing the Cover" on page
2 Installing Accessories in Your Computer
22).
"Removing the Air Flow Guide" on page
The small circle on
the module should
match up with a
small arrow on the
socket.
key while F2=Setup is displayed
Installing Video Memory
24).
29