Installing Video Memory On The Mga Millennium Card - HP Brio 8172 Upgrade Manual

Installing Video Memory on the MGA Millennium Card

1 Remove the computer's cover (refer to
connector from the back of the video card.
2 Remove the airflow guide to improve access to the backplane (refer to
3 Carefully remove the MGA Millennium card (refer to steps 3, 4 and 5 of
4 Install the memory module on the card.
VESA Feature
Connector
5 Carefully slide the card back into its slot (refer to steps 5, 6 and 7 of
6 Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power cords and
any telecommunications cables. Remember to reconnect the display connector to the back of the video card.
7 Turn on the display, let it warm up, and then turn on the computer. Press the
at the bottom of the screen. This displays a summary screen showing the computer's configuration details. Check that
the new memory is recognized (in the Video RAM field).
"Removing the Cover" on page
2 Installing Accessories in Your Computer
22). Remember to disconnect the display
"Removing the Air Flow Guide" on page
"Removing an Expansion Card" on page
"Installing an Expansion Card" on page
key while F2=Setup is displayed
Installing Video Memory
24).
41).
36).
31