Installing Main Memory
Caution
Your computer is supplied with main memory. If you need more main memory to run your applications, you can increase
the memory up to 192 MB.
Main memory is available in modules of 4 MB, 8 MB, 16 MB, and 32 MB. You must install memory modules in pairs which
are the same size.
Installing Main
1 Remove the computer's cover (refer to
Memory Modules
2 Remove the airflow guide to improve access to the system board (refer to
3 Align the memory module with the socket. Make sure that the notch in the module is as shown in the following diagram.
4 Slide the memory module into the socket at an angle of about 45° (that is, the leading edge of the module is pointing
slightly downwards). Firmly press the module completely into the socket.
5 Pivot the memory module to the horizontal position until it clicks into its retaining clips.
Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
"Removing the Cover" on page
2 Installing Accessories in Your Computer
22).
"Removing the Air Flow Guide" on page
Notch
Installing Main Memory
24).
25