Table of Contents
Advertisement
2 Installing Accessories in Your Computer
Installing Storage Devices
Troubleshooting
If the new drive is not recognized, you may need to run the Setup program: restart the computer and press the
key while F2=Setup is displayed.
If the new drive is still not recognized, check that you have correctly followed the installation procedure described
above.
If there are any errors reported during the computer's startup routine, press the
key to view the error(s),
and take any necessary action(s).
If you cannot start your computer properly, remove the new drive and try starting your computer again. If the computer
now starts OK, there may be a problem with the new drive.
If you experience any other problems as a result of the upgrade, refer to the online support center.
48
Advertisement
Table of Contents
