Table of Contents
Advertisement
Completing the
1 Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power cords and
any telecommunications cables.
Installation
2 Turn on the display and computer. The computer should recognize the new processor.
Troubleshooting
If the new processor is not recognized, the startup routine will stop shortly after you turn on the computer. If this
happens, turn off the computer and check that you have correctly installed the processor.
If the new processor is still not recognized, remove it and put the old processor back into the computer (remember to
reset any system board switches if necessary), and then restart the computer. If the computer now starts OK, there
may be a problem with the new processor.
If you experience any other problems as a result of the upgrade, refer to the online support center.
2 Installing Accessories in Your Computer
Installing a Processor Upgrade
58
Advertisement
Table of Contents
