Table of Contents
Advertisement
2 Installing Accessories in Your Computer
Installing Storage Devices
9 Turn on the display, let it warm up, and then turn on the computer. Press the
key while F2=Setup is displayed
at the bottom of the screen. This displays a summary screen showing the computer's configuration details. Check that
the new drive is recognized.
Depending on the type of drive you have installed, you may need to install some driver software.
Troubleshooting
If the new drive is not recognized, check that you have correctly followed the installation procedure described above.
If there are any errors reported during the computer's startup routine, press the
key to view the error(s),
and take any necessary action(s).
If you experience any other problems as a result of the upgrade, refer to the online support center.
54
Advertisement
Table of Contents
