Download  Print this page

Installing Video Memory On The System Board - HP Brio 80xx Upgrade Manual

Hp brio 80xx, upgrade guide.
Hide thumbs


Installing Video Memory on the System Board

1 Remove the computer's cover (refer to
2 Align the video memory module directly over the socket, making sure that the tapered end of the module is facing the
rear of the computer.
3 Firmly press the memory module completely into the socket.
4 Repeat steps 2 and 3 for the second memory module.
5 Install any other accessories before replacing the cover and reconnecting the power supply cords and any
telecommunications cables.
6 Turn on the display, let it warm up, and then turn on the computer.
7 Once your computer is up and running, use the Display icon in the Windows 95 Control Panel (accessible from the
Windows 95 START | Settings | Control Panel | Display | Settings) to change the video resolution
and the number of colors displayed.
"Removing the Cover" on page
System Board
The small circle on
the module should
match up with a
small arrow on the
2 Installing Accessories in Your Computer
Installing Video Memory


Table of Contents

   Also See for HP Brio 80xx

   Related Manuals for HP Brio 80xx

This manual is also suitable for:

Brio 82xxBrio 83xxBrio

Comments to this Manuals

Symbols: 0
Latest comments: