Table of Contents
Advertisement
4 Place the new battery in the battery holder, with the cross in the same position as on the old battery, and ensure that
it is properly seated. Ensure that the clip holds the battery firmly in place.
Installing an
You can also install an external battery (HP part number 1420-0513). You can order the battery from your local
External Battery
HP-authorized support agent or reseller. Install the external battery as follows:
1 Remove the computer's cover (refer to
2 Connect the external battery cable to the battery connector on the system board.
3 Mount the external battery on the side of the computer, using the self-adhesive strip supplied.
Completing the
After installing either a replacement or an external battery, install any other accessories before replacing the cover, then
reconnect the power cords and any telecommunications cables.
Installation
Run the Setup program to reconfigure the computer.
"Removing the Cover" on page
2 Installing Accessories in Your Computer
22).
Bottom-left of
system board
Changing the Battery
60
Advertisement
Table of Contents
