Table of Contents
Advertisement
Hold the module straight with both hands, and firmly push it into position.
4 Install any other accessories before replacing the cover and reconnecting the power cords and any telecommunications
cables.
5 Turn on the display, let it warm up, and then turn on the computer. Press the
at the bottom of the screen. This displays a summary screen showing the computer's configuration details. Check that
the new cache memory is recognized (in the System Cache field).
Troubleshooting
If the new memory is not recognized, check that you have correctly followed the installation procedure described
above.
If there are any errors reported during the computer's startup routine, press the
and take any necessary action(s).
If you cannot start your computer properly, remove the new memory and try starting your computer again. If the
computer now starts OK, there may be a problem with the new memory.
If you experience any other problems as a result of the upgrade, refer to the online support center.
2 Installing Accessories in Your Computer
Installing Cache Memory
key while F2=Setup is displayed
key to view the error(s),
34
Advertisement
Table of Contents
