Installing Expansion Cards - HP Brio 8172 Upgrade Manual

Installing Expansion Cards

Your computer has six expansion card slots. These slots allow you to install expansion cards as follows:
•
Slot 1 (next to the system board) can be used for a short 16-bit ISA or a 32-bit PCI board (16 cm/6.3-inch maximum
length).
•
Slots 2 and 3 can be used for 32-bit PCI boards.
•
Slot 4 can be used for a full-length 16-bit ISA or a 32-bit PCI board.
•
Slots 5 and 6 can be used for full-length 16-bit ISA boards.
You may already have one or more expansion cards installed and configured in your computer.
Note
The Windows 95 operating system can automatically recognize and configure many expansion cards that you may want
to install in your computer. With other cards, you will need to run the Windows 95 Add New Hardware wizard to help
Windows 95 to recognize the card.
You must physically install the card before you run the wizard. Refer to your Windows 95 documentation and online help
for more information about using the wizard.
The settings selected by Windows 95 may be different from those recommended by the card's manufacturer. In this case,
the card's jumper settings and driver options might need to be altered. Refer to the manual supplied with the card for
more information.
2 Installing Accessories in Your Computer
Installing Expansion Cards
35