Table of Contents
Advertisement
6 Ensure that the card's connector engages completely with the slot's connector and does not touch components on other
cards.
7 Secure the card by replacing the slot cover screw. If you loosened the screws on adjacent slots, remember to tighten
them.
8 If you are installing a VESA-standard video adapter card that uses the integrated video controller, connect the
expansion card's cable to the VESA Feature Connector on the system board. If you have a Matrox Millennium video
card installed, connect the new expansion card's cable to the VESA Feature Connector on the Millennium card (refer
to
page 31
to see a diagram showing the connector).
9 Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power cords and
any telecommunications cables. Turn on the display and computer.
10 If you have just installed a Plug and Play expansion card, Windows 95 is able to recognize and configure the card
automatically. The New Hardware Found dialog box is displayed while Windows 95 loads the necessary driver(s). You
may be prompted to insert a floppy disk containing the driver(s) for the new card.
If you have just installed a non-Plug and Play expansion card, run the Windows 95 Add New Hardware wizard
(accessible from the Windows 95 Control Panel) to help Windows 95 to recognize and configure the card.
Step 7
Step 8
2 Installing Accessories in Your Computer
VESA Feature
Connector on the
system board
Installing Expansion Cards
37
Advertisement
Table of Contents
