HP b2600 User Reference page 55

-u filter
Formats
The filter name list generated by the scrfilter command without
options or with the -l option has the following format:
filter_name1
filter_name2
The filter settings list generated with the -l option specified has the
following format:
Reference
search condition is reset.
The search condition affects the specified group only.
Whether other groups are displayed or not depends on
each view flag value of groups.
The pattern needs to be enclosed by round brackets.
Asterisk (*) can be used as wildcard character.
Backslash (\) is required as escape character to use
asterisk or round brackets as part of the pattern . The
pattern is allowed to exist only one attribute per
each group . The attempt to set second pattern into
different attribute within one group is not allowed.
The option is prohibited for the collection filter Probe.
Update specified filter settings by accessing the
configuration data name available on managed nodes.
If new data is detected, the data name is imported to
the filter. The update option does not remove existing
data names. The view or collection flag value for the
new data is defined by the extension flag with the
exception that off is set merely on the highest data.
(See NOTE for more information.)
:
[Filter Name]: filter
[Data Version]: data_version
[Extension]: flag
Component: component1
Group: group1
Attribute: attribute1
SCR Reference (man Pages)
scrfilter (1M) - Formats
fla op
g ti
on
fla op
g ti
on
fla op
g ti
on
55