HP b2600 User Reference page 36

SCR Reference (man Pages)
scr (5) - EXAMPLES
EXAMPLES
SCR Configuration
•
•
•
# scrconfig -n node2 -s 199902071205
# scrconfig -n node2 -l
NODE
node2
minutes
•
scrconfig -n node2 -s off
36
Register the management server on managed nodes.
The system administrator adds the management server name to the
/var/dmi/dmiMachines file on each managed node to allow access
from management server.
Register a managed node on the management server.
Use the scrconfig command to maintain managed nodes. All
managed nodes must be registered using this command. For
example, type in the following line on your management server to
include managed node node2.
# scrconfig -n +node2
If the DMI environment of the managed node is not working, not
configured correctly, or does not allow access from the management
server, the request to register the managed node may fail.
For scheduled data collection, set the data collection schedule with
the scrconfig command. For example, type in the following line to
set the scheduled data collection time to 12:05 Feb 7, 1999:
In order to confirm current parameters, use the following command:
The result resembles:
SCHEDULE TIME
02/07/1999 12:05 PST
Use the scrconfig command without options to view all nodes.
For data collection, the above command is sufficient, no further
action is necessary. If scheduled data collection is not needed, make
sure scheduled data collection is disabled. The schedule can be
stopped with
INTERVAL EXPIRATION TIMEOUT
1 day 3 months 5
Reference