Checking Data Collection Status - HP b2600 User Reference

SCR Overview

Checking Data Collection Status

Checking Data Collection Status
To check data collection status of all registered nodes, use the scrsta-
tus command. This provides a summary report of the last, current, and
scheduled data collection for all registered nodes, in time order.
# scrstatus
The report, printed to stdout, resembles the following example:
TIME (START – STOP)
02/06/199912:05 – 12:08 PST
02/06/199912:15 – 12:17 PST
02/07/199916:37 -
02/07/199900:05 -
02/07/199912:05 -
This report appears in three blocks separated by vertical space. The
first block above (the first two lines) reports the most recent data
collection. The second block shows data collection being performed. The
last block shows future scheduled data collection. Some of these blocks
might be empty, especially when SCR is first installed.
18
NODE STATUS
elsa Completed
ortrud Warning
PST ortrud Executing
PST ortrud Scheduled
PST elsa Scheduled
DETAIL
- AcErr -
Chapter 2