Table of Contents
Advertisement
4. Connect the internal cooling fan power cable to the connector on the system board.
Figure 57. Installing the internal cooling fan
Next steps
1.
Install the air
shroud.
2. Follow the procedure listed in
Removing the external cooling fan
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the air
shroud.
Steps
1. Disconnect the external cooling fan power cable from the system board.
2. Remove the four screws that secure the external cooling fan to the chassis.
3. Lift the external cooling fan to disengage the upper and the lower hooks from the slots on the chassis wall and remove the
cooling fan.
4. Remove the external cooling fan power cable from the slot on the system.
Figure 58. Removing the external cooling fan
Next steps
1. Follow the procedure listed in
2.
Install the air
shroud.
After working inside your
Safety
instructions.
Before working inside your
After working inside your
system.
system.
system.
Installing and removing system components
71
Advertisement
Table of Contents
