Mitsubishi Heavy Industries L2 Service Manual page 96

FUEL SYSTEM
49.0 to 58.8 N·m (5.0 to 6.0 kgf·m) [36.17 to 43.40 lbf·ft]
Figure 101 Installing nozzle holder
Fuel return pipe
24.5 to 29.4 N·m
(2.5 to 3.0 kgf·m)
[18.08 to 21.70 lbf·ft]
Figure 102 Installing injection pipe
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
Injection pipe
24.5 to 29.4 N·m
(2.5 to 3.0 kgf·m)
[18.08 to 21.70 lbf·ft]
Standard
Idling speed
13.7 MPa (140
[1992 psi]
Table 42 Injection start pressure
22.7 Installation
1. Clean the nozzle holder fitting surface of the
cylinder head. Install the nozzle holder with a
gasket.
2. Connect the fuel return pipe and injection pipe.
ENGLISH
INJECTION NOZZLE
Allowable limit
Measure engine speed
2
kgf/cm ) 12.7 MPa (130 kgf/cm
[1849 psi] or less
2
)
95 / 155