ENGINE MAIN PARTS
Direction of
cap installation
Front
Crankshaft end play:
0.05 to 0.175 mm
[0.0020 to 0.0069 in.]
Figure 82
Installation of crankshaft
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
Cap tightening torque:
49.0 to 53.9 N·m
(5.0 to 5.5 kgf·m)
[36.17 to 39.78 lbf·ft]
16.5 Installation
When installing the crankshaft, pay attention to the
notes given in the figure below.
Thrust bearing only for No. 2 cap
ENGLISH
CRANKSHAFT
Side seals coated with sealant
(THREE-BOND 1212)
Round end down
Place cap flush with the
end face of cylinder block.
77 / 155