Mitsubishi Heavy Industries L2 Service Manual page 116

AIR CLEANER
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
30.2 Inspection
1. Check the air cleaner body and look for
deformation, corrosion, and damage. If any defect
is found, repair or replace.
2. If the body and cover (element) are not airtight,
dust would enter into the engine, causing the
cylinders and pistons to wear early. Check interior
of the body for evidences of dust entering. If any,
repair the air-leak part.
3. Check the element and packing for damage and
air leak. If any defect is found, replace.
4. Check the element for contamination, clogging and
damage. If necessary, clean or replace the
element.
5. Check the intake hose for damage and cracks. If
necessary, replace the hose.
6. When installing the air cleaner, properly place it so
that the air inlet opening faces sideward or
downward. Also, install the dust pan following the
arrow marked "TOP".
ENGLISH
AIR CLEANER
115 / 155