Mitsubishi Heavy Industries L2 Service Manual page 107

GENERAL
Description
FAN BELT Standard type for industrial application
L2: Standard type for industrial
application
COOLING FAN
L3: Standard type for industrial
application
WATER PUMP Type
Type
THERMOSTAT Valve opening temperature
Full-opening temperature
Standard type
THERMOSWITCH
Switch-ON temperature
Gage specification
TEMPERATURE
GAGE UNIT
Voltage used
Table 45 Specifications
106 / 155
COOLING SYSTEM
25 GENERAL
25.1 Specifications
LL HM type, length 905 mm [35.6299 in.]
4-blade or 5-blade, unequal pitch, pusher or suction type,
5-blade or 6-blade, unequal pitch, pusher or suction type,
90°C [194°F] (Valve lift 6 mm [0.2362 in.] )
1. All specifications are subject to change without any prior
notice
ENGLISH
COOLING SYSTEM
1
Specification
ø 290 [11.4173 in.]
ø320 mm [12.5984 in.]
Centrifugal impeller
Wax pellet type
76.5±1.5°C [169.7±2.7°F]
Bi-metal type
111±3.5°C [231.8±6.3°F]
70°C [158°F]/104±13.5 W
115°C [239°F]/23.8±2.5 W
12 volt DC
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004