Mitsubishi Heavy Industries L2 Service Manual page 4

TERMS USED IN THIS MANUAL
Before reading this manual, note that the following special terms are used in dimensional and other specifications.
Assembly standard
Indicates the dimension of a part, the dimension to be attained at the time of reassembly or the standard
performance. The value is rounded to the nearest number needed for inspection and is different from the design
value.
Repair limit
A part which has reached this limit must be repaired.
Service limit
A part which has reached this limit must be replaced.
ENGLISH 3 / 155
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004