Table of Contents
Advertisement
2.2 Hardware Installation
2.2.1 Unpacking the Camera
2.2.1.1 Loosening the Screws
Loosen the three screws using the hex screwdriver included in the camera package.
When the camera is taken out from the box, the lens cover is covered by a thin
film. Do not remove this film. It is used to protect the lens cover from scratches
or fingerprint marks which may happen during installation. Remove this film
only after the camera is securely installed and all connections are complete.
5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
17
ICA-E8550
Advertisement
Table of Contents
