Hardware Installation - Planet Networking & Communication ICA-8500 User Manual

5 DO_NO2
6 DO_COM
7 DO_NO1

2.2 Hardware Installation

2.2.1 Wall, Ceiling Mounting Installation
Step 1. Stick the given mounting label at the installation location.
Step 2. Take the wall mount bracket, put it on the target place and fix it with the supplied screws
(total of 2).
Step 3. Load the camera into the wall mount. Be sure the camera is mated with two fixed screws,
and rotate the camera clockwise to lock it in position.
5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
exceed 130mA. An external "Relay" can also be connected to the
terminals as an implementation. In this case, current (or/and
voltage) limitation is specified by the external relay.
14
ICA-8500/ICA-W8500