Appendix B. Ping Ip Address - Planet Networking & Communication ICA-E8550 User Manual

Appendix B. Ping IP Address

The ping (stands for Packet Internet Groper) command is used to detect whether a specific
IP address is accessible by sending a packet to the specific address and waiting for a reply.
It's also a very useful tool to confirm whether or not the camera is installed or if the IP
address conflicts with any other device over the network.
If you want to make sure the IP address of the camera, utilize the ping command as follows:

Start a DOS window.

Type ping x.x.x.x, where x.x.x.x is the IP address of the camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device that conflicts with the IP address of the camera, you
also can utilize the ping command but you must disconnect the camera from the network
first.
5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
125
ICA-E8550