I/O Control Instruction; Hardware Installation - Planet Networking & Communication ICA-W3250V User Manual

Full hd outdoor ir wireless ip camera
Hide thumbs Also See for ICA-W3250V:
Table of Contents

Advertisement

6. Line out (audio out)
Connect a loud speaker to the network camera. This is for voice alert and two-way audio.

2.1.2 I/O Control Instruction

1) Please connect the GND and DO pin to the external relay (buzzer) device.
2) Please connect the GND and DI pin to the external trigger device.
3) I/O Pin definition
GND (Ground): Initial state is low
DO (Digital Output): 5V DC
DI (Digital Input): Max. 50mA, 5V DC

2.2 Hardware Installation

1. Inserting Micro SD Card (optional)
If user needs to save video to SD card, please remove the micro SD card lid and insert your
SD card. Then turn and lock the screws on the micro SD card lid tightly and make sure it's
sealed.
1. Please power off the device and then insert or remove the micro SD/SDHC
card.
2. Please refer to Appendix G: Micro SD Card Compatibility to select your micro
SD/SDHC card.
3. Be aware the waterproof rubber, improper placement or missing the rubber will
cause seal malfunction.
Full HD Outdoor IR Wireless IP Camera
13
ICA-W3250V

Advertisement

Table of Contents
loading

Table of Contents