Table of Contents
Advertisement
select the first option. If you select the second one instead, all the settings would be removed
during factory default. You will have to use factory default IP setting to connect to this
camera.
3.13.4 Firmware Upload
The Firmware Upload section allows remote upgrade or downgrade of camera firmware.
The upgrade to newer version is usually done in order to gain new functions or fix existing
bugs or limitations while downgrade to older version is used mostly for integration purposes
where the newly purchased camera model comes with the newer firmware version than
supported by a third party video management system of a given project.
The firmware image file can be downloaded from the website. It has the file extension ".upg".
After pressing the Apply button, it is possible to browse for firmware image file that has
already been downloaded to the computer that has the web management running.
Click Browse to select the upload image file. Click the Apply button to start the upload.
Once the process is finished, you will get an "OK" message and system will reboot itself.
1.
Do not power off device during the upgrade process. It will damage the unit.
2.
After upgrading firmware, please restore the device to default setting.
5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
122
ICA-E8550
Advertisement
Table of Contents
