Host Setup; Host - Planet Networking & Communication ICA-E8550 User Manual

3.6 Host Setup

The "Host Setup" section allows the administrator to define the name of the camera and
preferred user interface language.

3.6.1 Host

Parameters
Host Name is used to identify the camera by a DHCP server. In some
Host Name
networks with very strict security policy, it is required that all the network
devices should have their host name, and when the devices attempt to
access the network by requesting an IP address from a DHCP server, the
DHCP server would check if the host name is among the allowed devices.
On this page, it is possible to edit the Host Name. To actually include the
Host Name in DHCP discovery packet sent from a camera, please go to IP
Settings and make sure the device is in Dynamic IP Address mode and
"Use host name" is checked.
Language Language selection under Host has the same purpose as the one on the
login page of Web Configuration.
5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
Description
47
ICA-E8550