Hardware Installation - Planet Networking & Communication ICA-M4320P User Manual

provided) may have to be used. Serious damage to the network camera may
result if a device is connected to the external I/O that exceeds its electrical
capability.

2.2 Hardware Installation

1. Open the cover:
Remove two screws to release the top cover (with screws still attached on the cover) of the
dome and open it.
2. Place the camera on the ceiling or fix it onto wall:
Use three screws to fix the camera onto the ceiling or wall. Set the mounting base onto ceiling
and center it through the mounting hole, using the two retaining screws for the main body,
supplied by the appurtenance bag.
3. Plug an Ethernet cable into the camera:
Connect a Cat5e Ethernet cable (not included in the package) to the LAN socket.
H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom
18
ICA-M4320P