Hardware Installation; Unpack The Camera - Planet Networking & Communication ICA-E6260 User Manual

2.2 Hardware Installation

2.2.1 Unpacking the Camera
2.2.1.1 Loosen the Screws
Loosen the four screws using the hex screwdriver included in the camera package.
To avoid scratches or leaving fingerprints on the dome cover, it is
recommended to retain the plastic covering the dome cover until the
camera is completely installed. However, the plastic has been removed in
the pictures in this documentation to show clarity of the procedures being
described.
2 Mega-pixel PoE Plus Speed Dome IP Camera
19
ICA-E6260