Parameters
Camera Name
Camera Name is used to identify the device by Video Management System
or by Software Tools. Usually, upon installation of the camera, the actual
installation location is used as an easy-to-remember Camera Name, such
as "Front Gate" or "Elevator 1". In many cases the VMS is able to modify
the Camera Name directly via its own user interface without needing to
access Web Configuration.
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
3.6.2 GPS Position
This section allows users to manually set the GPS position of the camera and find the
location of the camera on the map when using a Network Video Recorder (NVR).
5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
Description
48
ICA-E8550