Identification Of Ica-3350P Cable; Hardware Installation; Physical Installation - Planet Networking & Communication ICA-3350P User Manual

2.1.2 Identification of ICA-3350P cable

Interface
1 - RS-485 & digital I/O
2 - Power
3 - Reset
4 - Audio output
5 - Audio input
6 - Ethernet (POE supported)
7 - TV output
ONLY use package power adapter supplied with the Internet. Otherwise, the
product may be damaged.

2.2 Hardware Installation

2.2.1 Physical Installation

1. Connecting an Ethernet cable
Connect the LAN cable on the camera to PC.
3 Mega-pixel Remote Focus Bullet IR IP Camera
+ : RS485+
- : RS485-
1 : DO
2 : GND
3 : DI
DC power input, connect to AC power adapter
Reset IP cam to default setting
User could follow the steps to restore the device to factory
default setting:
1. Power on the camera and wait a while until the boot
procedure finish.
2. Press the hardware reset button over 10 seconds, and
release it.
3. Camera will reboot and restore to factory default setting.
Connects to external audio amplifier or speakers with built-in
amplifier. May require appropriate audio jack converter
(depends on the type of amplifier / speaker you're using).
Connects to audio peripheral for audio input, like
microphone or other audio devices
Connects to your local area network by Ethernet cable.
Orange LED : Power on.
Green LED: Ethernet cable is connected.
Connects to TV
12
Description
ICA-3350P