AC Terminal Block
(AC input and output wiring)
SINGLE IN / DUAL OUT wiring
In mobile installations: neutral is typically not
connected to ground in the main panel.
Main Panel
(Utility Power/Generator Input)
Figure 2-11, AC Wiring for Single In – Dual Out Confi gurations
© 2017 Sensata Technologies
AC GROUNDS
(to/from
both panels)
ON
OFF
30
Maximum breaker size required
ME2012-15B: 45-amp breaker
breaker sizes allow full charging
and full pass-thru capability for
Has optional 15-amp or 20-
amp branch-rated circuit
breakers (on side of unit).
ME2012-20B Inverter
to inverter AC input
depends on model used.
(single pole);
ME2012-20B: 60-amp
breaker (single pole). These
your inverter model.
Installation
ME2012-15B or
120
120
VAC
VAC
Direct from inverter
(Inverter Loads)
Page 23