Supermicro SuperServer SYS-1029U-TN12RV User Manual page 95

Server ME Configuration
This feature displays the following system ME configuration settings.
•
Operational Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCH SATA Configuration
SATA Controller
This feature enables or disables the onboard SATA controller supported by the Intel® PCH
The options are Disable and Enable.
chip
.
Configure SATA as
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID.
SATA HDD Unlock
Select Enable to unlock the HDD password. The options are Disable and Enable.
Aggressive Link Power Management
When this feature is set to Enable, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link to a low power state when the I/O is inactive for
an extended period of time, and the power state will return to normal when the I/O becomes
active. The options are Disable and Enable.
*If the feature, Configure SATA as, is set to AHCI, the following features will become
available for user's configuration:
SATA Port 0~ Port 7
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
95
Chapter 6: UEFI BIOS