Supermicro SuperServer SYS-1029U-TN12RV User Manual page 62

SuperServer 1029U-TN12RV User's Manual
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the
table below for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including IDE, SATA activities. See the table below for
pin definitions.
NIC1/NIC2 (LAN1/LAN2) LED
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pin 12 of
JF1, and LAN port 2 is on pin 10. Attach the NIC LED cables here to display network activity.
Refer to the table below for pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 NMI
20 Ground
Power LED
Pin Definitions (JF1)
Pin# Definition
15 Vcc
16 FP PWR LED
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 Vcc
14 HDD LED
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
10 NIC2 Activity LED
12 NIC1 Activity LED
62