Supermicro SuperServer SYS-1029U-TN12RV User Manual page 205

Appendix F: Configuring VROC RAID Settings
The following screen will appear.
Step 2. Intel® VMD for Volume Management Device for PStack0
The options are Disable and Enable. Set this feature to Enable.
Step 3. P1_NVMe0 VMD and P1_NVMe1 VMD
Set VMD on all the PStack0 NVMe related devices to Enable as well as set Hot Plug Capable
to Enable.
Step 4. Intel® VMD for Volume Management Device for PStack1
The options are Disable and Enable. Set this feature to Enable.
Step 5. AOC-URN4-m2TS NVME0 VMD, AOC-URN4-m2TS NVME1 VMD, AOC-URN4-
m2TS NVME2 VMD, and AOC-URN4-m2TS NVME3 VMD
Set VMD on all the PStack1 NVMe related devices to Enable as well as set Hot Plug Capable
to Enable.
Note: This option or AOC device name may vary depending on the Ultra Riser card installed
in the system
205