Supermicro SuperServer SYS-1029U-TN12RV User Manual page 219

Appendix F: Configuring VROC RAID Settings
The feature, Mark as Spare, allows the user to set the selected NVMe device as a spare
disk. Use the arrow keys to select Mark as Spare and press <Enter>. The following screen
will appear. The options are Yes and No.
Note: A spare disk is used for automatic RAID volume rebuilds when status of failed, missing,
or at risk is detected on the array disk. For a RAID0 volume, only status of at risk will trigger
automatic RAID volume rebuilds.
219